SC50F-M DTH Hammer
Product Description
SC50F-M DTH hammer is SOLLROC F series hammer (no inner cylinder series).
The SC50F-M hammer have been proven in mines. It is excellent performance for blasting hole for in open-pit mine.
1、Valveless air distribution ensures smooth working.
2、Piston design and harden wear part ensure strong wear-resistance.
3、Minimize the energy loss, high penetration, lower air and oil consumption.
4、Fewer internal parts minimize the maintain and replace the part requirements.
Model | SC50F-M |
Bit shank | M50 |
Top sub thread | API 2 3/8" REG |
Length (less bit) | 1020mm (40.16 in) |
External diameter | 126.5mm (5 in) |
Weight (less bit) | 65.8kg (145lbs) |
Impact rate at 17 bar | 32HZ |
Hole range | 135mm-152mm (5.3 in - 6 in) |
Working pressure | 10-25 bar (145 - 363 PSI) |
Speed recommended | 30-60 rpm |
Pull force recommended | 8.5 KN |
Dia | Button configuration | Bit design | Weight | Part number | ||
Metric | Inch | Gauge button | Front button | |||
140mm | 5 1/2" | Ф18mm*7 | Ф14mm*3,Ф15mm*4 | Convex face | 13.7 | SC50F-M-140CV |
140mm | 5 1/2" | Ф16mm*8 | Ф14mm*8 | Flat face | 13.9 | SC50F-M-140FF |
146mm | 5 3/4" | Ф18mm*8 | Ф15mm*8 | Flat face | 14.5 | SC50F-M-146FF |
146mm | 5 3/4" | Ф18mm*8 | Ф15mm*4,Ф14mm*3 | Concave face | 14.5 | SC50F-M-146CC |
152mm | 6" | Ф18mm*8 | Ф15mm*8 | Flat face | 15 | SC50F-M-152FF |
152mm | 6" | Ф18mm*8 | Ф16mm*4,Ф14mm*4 | Concave face | 14.8 | SC50F-M-152CC |